No products
Rockna Wavedream Reference DAC is built on a highly optimized and...
Viewed products
Artemis Interconnect Line Cable RCA...
fuentes RSS
No RSS feed added
New
The interconnections between sources, preamplifiers and amplifiers, need dedicated cables for transfer a low level signal, generally 2-5 volts nominal.
Pure copper 99.9999% and treated to our specifications.
10 Items
The interconnections between sources, preamplifiers and amplifiers, need dedicated cables for transfer a low level signal, generally 2-5 volts nominal, but with dynamic peaks of even 20 volts and also micro signals of the transfer order a few millivolts.
The audio signal has amplitude and impulsive frequencies (musical program) and it must be reproduced faithfully, especially in the time domain, therefore of the phase, the most difficult parameter to keep under control.
The conductor must be of primary quality and with physical chemical characteristics close to the ideal hypothetical cable or dielectric, to increase the purity of the transfer without losses and with low temporal jitter. Artemis Interconnect Line Cable is made only and exclusively with pure cotton dielectric, so as to guarantee low parasitic capacity and high propagation speed, the poles are made with a very effective electromagnetic shield, with a thickness covering 100% of the conductor surfaces, so as to avoid the electronic jump by migration in the high frequency dynamic peaks. Artemis conductors are made in pure copper 99.9999% and treated to our specifications.
Vyda is also able to create custom cable, ad hoc on request for specific situations of the customer.
ARTEMIS Line Cable RCA: Reference interonnection line, LIMITED EDITION Pure copper conductors realized by our specification Custom Cryogenic treatment of wires and proprietary internal geometry High level of mechanical insulation of the wires and pure natural cotton is used like a dielectric High degree of insulation RFI / EMI with a different layers of non-magnetic shielding Exclusive and proprietary RCA plugs realized in pure copper and PTFE. The our Rca caps is realized in non-magnetic stainless steel R.303 | 4.320,00 |
1,20 m | |
Extra 0.50 m | 750,00 |